Ceramic 3Dresyn CDP-WS has these features and benefits:
- excellent dispersability and flow of post added sintering ceramic, metal, polymer, and exotic micron and submicron nano powders
- partially water soluble, fast debinding in water
- partially insoluble to retain the shape during thermal debinding
- the ceramic additions can be up to 50% volume concentrations still with good flow
- very high resolution 3D printing for very high detail and resolution applications
- high print quality and speed with curing wavelengths up to 410 nm and higher upon request
- controlled and reproducible process shrinkage
- minimum expansion coefficient and wide temperature interval of debinding to prevent micro-fractures
- elongation <7%
- relative low viscosity, good flow
- very high resolution of 20 microns of final products
- low shrinkage
- printable by SLA DLP 3D printers
- increased durability of the resin tank
- organo-tin free
- used in combination with our Adhesive Primer 3Dresyn AP1 for promoting adhesion on the build platform when high powder loads are used
- clean and postcure your 3D prints with Cleaning Fluid WS1 Bio
Please click on this link for instructions for use: Instructions for Use "IFU" of our water soluble 3D resins
