3Dresyn OD FDB Flexible Denture Base in Gingiva color has these features and benefits:
ideal for printing durable flexible partial removable dentures in 3 natural gingiva shades
based on 4D Shape Memory Polymers SMP´s, with excellent shape memory with temperature, recovering their shape upon heating
superior performance properties without bacteria / fungus accumulation
100% biocompatible
ultra pure and safe, non cytotoxic
designed for printing it at: 20-30ºC
choose LV version for a relatively Low Viscosity (<5000-6000 mPas at 25ºC) for printing without heated printers or below 25ºC
choose HV version for relatively High Viscosity (<8000-9000 mPas at 25ºC) for printing with heated printers or above 25ºC, for overall improved durability and mechanical properties
available in two versions: rigid and flexible versions for printing flexible denture bases
rigid version is similar to nylon / polyamide PA 12 Valplast
rigid version: ideal for <1.5 mm
flexible version is similar to rigid thermoplastic urethane TPU
flexible version: ideal for >1.5 mm
Shore hardness D60-70
high flexural strength <40 MPa
Young´s modulus 750-1250 MPa
rigid version closer to 1250 MPa for thickness <1.5 mm
flexible version closer to 750 MPa for thickness >1.5 mm
high tensile strength <40 MPa
<10% stress relaxation after 1 week at 2, 10 and 20 MPa initial stress
elongation <30%
high impact and shattering resistance (Notched Izod <70 J/m)
high resolution up to 20 micron
very low shrinkage
organo tin free
increased durability of the resin tank
water solubility: ≤ 1,6 µg/mm3
hydrophobic, ultra low water sorption ULWA≤ 32 µg/mm3
printable by SLA, DLP & LCD 3D printers even at low room temperature <20ºC
fully compliant with the Quality requirements of FDA, ISO 20795, 13485 & 10993
