3Dresyn OD-Clear T&C Tough & Comfortable has these features and benefits:
- tough and comfortable material for printing durable comfortable and resilient night guards and splints, slightly pliable under pressure
- tough and foldable , semirigid, pliable under pressure at low thickness, with good memory until regains its original shape
- based on 4D Shape Memory Polymers SMP´s, with excellent shape memory with temperature, recovering their shape upon heating
- safe and biocompatible: only mild skin irritant before curing and cleansing
- choose LV version for a relatively Low Viscosity (<6000 mPas) for printing without heated printers or below 25ºC
- choose HV version for relatively High Viscosity (>6000 mPas) for printing with heated printers or above 25ºC, for overall improved durability and mechanical properties
- available in two versions: rigid and flexible versions for printing aligners
- suitable for printing flexible thin copings or Indirect Bonding Trays IBTs at 0.2-0.3 mm for placing attachments
- Shore hardness D60-70 range
- excellent clarity and non yellowing
- flexural strength <40 MPa
- elongation <30%
- high impact and shattering resistance (Notched Izod <70 J/m)
- tensile strength <40 MPa
- rigid and flexible versions with medium rigidity (Young modulus 600-1200 MPa)
- rigid version closer to 1000 MPa for thickness <2 mm
- flexible version closer to 500 MPa for thickness <2 mm
- durable, non yellowing
- high resolution up to 20 micron
- very low shrinkage
- organo tin free
- increased durability of the resin tank
- water solubility: ≤ 1,6 µg/mm3
- hydrophobic, ultra low water sorption ULWA≤ 32 µg/mm3
- residual monomer <0.1%
- printable by most commercial and professional SLA DLP & LCD 3D printers
- fully compliant with the Quality requirements of FDA, ISO 20795, 13485 & 10993
-
IFU for 100% clarity & transparency (without any haziness or whitish finishing)
