Description
Fine Tuner FT3 is ideal for increasing the print speed without causing significant yellowing to prints in Ultraviolet and Visible SLA, DLP, LCD & Inkjet 3D printers.
Its use is essential in UV & Visible SLA, DLP, LCD & Inkjet 3D printers, which do not provide the option of changing neither the light power (mW/cm2) nor the exposure time (seconds), because speeds up the cure of your prints.
It is recommended the use of Fine Tuner FT1 in steps of 0.1% in high power printers (strong laser and high power DLP printers) and of 0.5-1% in low power printers (LCD & MLCD printers) to increase gradually printing speed. Avoid over dosage to avoid overcure of the resin beyond limits/specifications, resulting in potential loss of resolution, precision, and dimensional accuracy of your prints.
It is supplied as a kit, which contains the product, one graduated beaker and one empty 250 mL black bottle to measure, mix, keep and protect the 3D resins from daylight. Please do not expose any 3D resins to natural or room light to prevent their curing.
.
Note: Fine Tuner FT3 is recommended for printers working with UV & Visible light wavelengths up to 420 nm (150-420 nm range). Our 60 mL dispenser of FT3 is normally used at small dosage and it is enough for fine tuning between 6-12 kgs of 3D resins. Fine Tuner FT3 tends to crystallise naturally. A gentle warming (use microwave with extreme caution) will redissolve the crystals.
