Discover our SLA, DLP & LCD 3D "bioplastic" 3D resins for direct printing of aligners. Our resins for printing aligners are bio-based and can be printed with most commercial SLA, DLP, LCD, and Inkjet printers and postcured with affordable light boxes since expensive light boxes with nitrogen gas are not needed for printing and post processing aligners successfully.
3Dresyn OD-Clear TF LTP is our reference SLA, DLP & LCD 3D resin for direct printing of aligners. It can be printed with most SLA, DLP & LCD printers, even with affordable LCD printers (with the exception of Formlabs, Sprintray, and DWS printers).
Our SLA, DLP & LCD 3D resins for printing aligners are available in different versions for maximum validation control of clinical studies and applications of your in-house manufactured aligners:
- relatively more rigid or more flexible versions for maximum control of teeth movement at your chosen aligner thickness, typically between 0.6-1 mm
- relatively low or high viscosity versions for printers working at 20-25ºC or at 30-35ºC with heated printers for increased mechanical strength and durability
Discover our ultra safe Cleaning Fluid UNW1 Bio and Cleaning Fluid UNW2 Bio (both do not have any risks nor hazards for health) for ultra safe cleaning and post processing 3D printed aligners with optimum gloss and clarity. Its usage prevents gloss and clarity reduction as well as helps to remove and wash off both hydrophobic and hydrophillic residuals and byproducts, for leaving the aligners colorless, odorless, tasteless, and safe for use when produced as per our instructions!
Aligners can be printed vertically without any supports, without any yellowing, nor any haziness, and without wasting any resin, yielding around 400-500 aligners of around 2-2.5 grams each per 1 kg resin, with an aligner cost of circa of 1-1.25 Euro, without any waste of time for cutting supports, and with an improved fast & easy cleaning process. The whole printing, postcuring, and post processing cycle takes <3 hours, without the need of any expensive printers and light boxes with nitrogen gas for printing and pot processing safe functional aligners.
Discover our new Vita colored and ultra low temperature printing 3D resins for printing removable veneers and colored aligners: 3Dresyn OD FRV for printing Flexible Removable Veneers and colored aligners with Vita colors
Discover our new ultra low (relative ) viscosity 3D resin fro printing aligners: 3Dresyn OD-Clear TF ULTP for ultra low temperature printing of aligners with SLA, DLP & LCD printers
3Dresyns developed in 2018 the World's first biocompatible functional 3D resin for printing aligners, based on bioplastics from renewable sources, with a thermo responsive 4D shape memory function.
Our Bioplastic 3Dresyns for printing aligners are durable during usage as well as more ecological than the existing alternative materials used for making aligners (models and conventional thermoformed plastic disks), which use petroleum based plastics.
Our 3D resins for printing aligners are compliant with the Quality requirements of FDA, ISO 20795, 13485 & 10993.
For more info read:- Recommendations for printing aligners
- Detailed Instructions for Use "IFU" for printing aligners with DLP & LCD printers
- Benefits of our 3D printed aligners
- Biocompatible 3D resins for medical devices
- Biomedical and food certifications
- Frequently Asked Questions about 3D printed biomedical and dental resins
- Pictures of Orthodontic & Dental devices
- Videos of our Orthodontic and Dental devices
Shop online our "ready to use & print" 3D resins for printing aligners:
