3D Adhesive HDTA1 Bio, High Deflection Temperature Adhesive

3D Adhesive HDTA1 Bio, High Deflection Temperature Adhesive has these features and benefits:

• ideal for gluing 3D printed parts to plastics and metals
• photoreactive durable adhesive
• rigid with high deflection temperature
• cures in seconds under sunlight or in any standard light box at high thickness (from 0.1 to 1 cm)
• clear, non color 
• extra hard Shore D90
• Tensile strength >50 MPa
• Flexural strength >40 MPa
• rigid (Young modulus 2700-3100 MPa)
• elongation <2.5%
• high Deflection Temperature up to 160C@0.45MPa
• synthetic resin source
• 100% biocompatible
• ultra pure and safe, non cytotoxic
• provides excellent and durable bonding
• organo-tin free
• 100% pass in the cytoxicity test
• water solubility: ≤ 1,6 µg/mm3
  
• hydrophobic, ultra low water sorption ULWA≤ 32 µg/mm3
  
• residual monomer <0.1%
  
• fully compliant with the Quality requirements of ISO 20795-1 and ISO 10993-1

Note: Apply several drops of 3D adhesive on the denture base. After locating the teeth on the denture base photo cure it in a light box for 5-10 minutes until the adhesive is fully cured and the teeth are fully bound to the denture base