3D-ADD RCC2 has these features and benefits:
- excellent Reinforced Composite Concentrate, supplied as a paste at high concentration of safe and natural based reinforcing fibers
- it can be added to any 3Dresyn to improve their physical and mechanical properties*:
- increased wear resistance by reducing friction and Coefficient of Friction COF
- tensile strength increases up to 15%
- flexural strength increases up to 25%
- elongation at break % increases up to 25%
- Mohs hardness: 2
- eco friendly and ultra safe, based on natural raw materials
- non hazardous, free of hazards, pictograms and risk phrases
- stable free flowing whitish paste / slurry
- easy to add and mix in any 3Dresyn
- minor whitening effect
- organo-tin free
- additions of 20-30% by weight are recommended to preserve printability in most SLA, DLP & LCD printers and provide significant mechanical properties improvement and durability of reinforced composite 3D printed materials
- Available in 3 versions:
- Lipophilic LP version with HLB: < 7.5 (Ultra Low Water Absorption ULWA grades)
- Medium Hydrophilicity MHP version with HLB: 7.5-12
- High Hydrophilicity HHP version with HLB: >12
It is supplied as a kit, which contains the product, one graduated beaker and one empty 250 mL black bottle to measure, mix, keep and protect the 3D resins from daylight. Please do not expose any 3D resins to natural or room light to prevent their curing.
Note: the effect on the mechanical properties will depend on the original properties of the chosen 3Dresyn and the dosage of the concentrate used. Step addtions are recommended to get the optimum and desired overall properties balance for each reinforced composite system.
