Discover our Eco Powder Binders for SLS printing of Metal, Ceramic & Polymer powders by SLS Cold Metal, Ceramic & Polymer Fusion.
For more info read: About Cold Metal Fusion CMF, Cold Ceramic Fusion CCF, Cold Polymer Fusion CPF, and Cold Exotic Materials Fusion
Features and Main Benefits:
- flexible and versatile, since allow experimentation of new sinterable solid materials, from Ceramic, Metal, Polymer, and exotic powders or fibers printable by Cold Metal Fusion (CMF), Cold Ceramic Fusion (CCF) & Cold Polymer Fusion CPF
- universal water or solvent soluble debindable Eco bio-based Powder Binders for Selective Laser Sintering SLS printing of any (your chosen) Ceramic, Metal, Polymer, and exotic powder or fiber by Cold Metal Fusion (CMF) , Cold Ceramic Fusion (CCF) & Cold Polymer Fusion CPF
- eco friendly, since our powders are bio-based with 100% Bio content or 100% biocompatible for eco friendly SLS printing, debinding and sintering of ceramics, metals, polymers (such as polyimide), and exotic powders (including nanowires, microfibers, etc)
- affordable, our affordable powder binders are printable with even low-cost low-power plastic / polymer powder SLS printers
- easy handling, physical dry powder mixing and wetting w ith ceramics, metals, polymers and exotic powders with low cost dry powder mixing equipment
- stable, excellent adhesion, uniformity and stability (without gravitational separation) after mixing with micron and submicron ceramics, metals, polymers, such as polyimide, and exotic powders (including nanowires, microfibers, etc)
- high volume concentrations, ceramic, metal, polymer, and exotic powder (including nanowires, microfibers, etc) additions can be up to 60% volume concentrations (lower for nanoparticles, nano wires and microfibers)
- fast and safe eco debinding, soluble in water or in Debinding Solution EDS1 Bio at 90ºC for "cold" water or eco solvent debinding and sintering without imperfections nor cracking
- reproducible, promote controlled and reproducible process shrinkage which depends on final added % powder ratio
- perfect debinding, minimum expansion coefficient to prevent micro-fractures
- ultra fine, maximum particle size <50 microns for high resolution printing
- very high resolution, up to 50 microns of final products (depending on the particle size of the chosen ceramic, metal, polymer, or exotic powder or fiber)
Recommended plastic or polymer powder SLS printers: SLS printer compatibility, any open mode plastic/ polymer powder SLS printer can be used
3Dresyns can add Powder Binders for SLS Cold Metal, Ceramic & Polymer Fusion to your chosen ceramics, metals, polymers (such as polyimide), and exotic powders (including nanowires, microfibers, etc) to meet your specifications. Contact us for quotations at: info@3Dresyns.com